Fluorocarbon sprayed aluminum veneer has strong color retention, corrosion resistance and UV resistance. It can also prevent cracking in harsh environments. Not only for the exterior walls of high-rise buildings, but there is also a comprehensive selection of colors. The metal luster is good, but it also has the advantage of impact resistance, etc., the interior decoration is often designed as a fluorocarbon aluminum veneer, such as a background wall , Ceilings, beams commonly used envelopes. Aluminum veneer

(1) As domestic fluorocarbon aluminum veneer manufacturers are high-end decorative materials for fluorocarbon aluminum veneers, there is also a big gap in their production levels. Therefore, when selecting suppliers, they should be carefully selected, removing their production scale and capabilities, project performance, and focusing on their technical design capabilities. Those small-scale and low-level processing plants and manufacturers cannot choose because of low prices, otherwise it will have a great impact on the quality and schedule of the project and cause huge economic losses to customers.

(2) Before processing the fluorocarbon sprayed aluminum veneer, as an important process data measurement, it is recommended to use an infrared rangefinder for measurement. If a traditional tape measure is used, measurement errors will occur, and it will have a very negative impact on the aluminum plates that need to be tightly bonded. Shenzhen aluminum veneer

(3) When processing fluorocarbon sprayed aluminum veneer, not all aluminum sheets should be processed at one time. The last aluminum plate and corner plate of each installation area should not be processed temporarily. After the carbon-sprayed aluminum veneer is installed, re-measure on-site data to obtain accurate dimensions for post-processing to avoid unnecessary rework and economic losses. Aluminum veneer manufacturers

(4) Although the fluorocarbon-sprayed aluminum veneer is a kind of metal decorative board, the fluorocarbon-sprayed layer is easy to scratch. Therefore, in addition to requiring manufacturers to bring their own protective film, care must be taken to avoid scratches and heavy objects during handling and installation, otherwise it will seriously affect the overall appearance of the aluminum plate. Fluorocarbon aluminum veneer

(5) In the installation method of fluorocarbon sprayed aluminum veneer, the most common and most difficult quality problem is the uneven joints between the blocks, which should be paid enough attention. In addition to paying attention to the uniform thickness of the adhesive during the construction process, the temporary fixing measures shall not be removed prematurely, generally no less than 12 hours.

(6) The base material board adopts fluorocarbon sprayed aluminum veneer, glass magnesium board or large core board with waterproof performance for bonding installation, and paper stone board is not allowed. The main reasons are: the board itself is low in strength and the aluminum board is not firmly bonded; the second is that the paper-faced gypsum board is not waterproof, and various water supply and drainage pipes are generally embedded in the ceiling. Once the local leakage occurs, the aluminum plate will fall off. Aluminum veneer price