As one of the most commonly used curtain wall decoration materials in aluminum veneer, fluorocarbon sprayed aluminum veneer should be carefully maintained in daily life. How to maintain as described below?

The structure of the fluorocarbon sprayed aluminum veneer is mainly composed of panels, stiffeners and lugs. Fluorocarbon coated aluminum veneer is usually pretreated with chromium on the surface of the curtain wall and then sprayed with fluorocarbon. After a series of processing, the performance of the fluorocarbon coated aluminum veneer is very good. Therefore, the fluorocarbon coated aluminum veneer is becoming more and more popular!

The cleaning and maintenance of fluorocarbon-coated aluminum veneers can be complicated, but proper maintenance of fluorocarbon-coated aluminum veneers can greatly extend the service life of fluorocarbon-coated aluminum veneers. If the user needs fluorocarbon coated aluminum veneer, the maintenance steps are as follows:

(1) If it is a fluorocarbon sprayed aluminum veneer, and the cleaning is to use the whitening aluminum degreasing agent to clean the skin of oil and oxides, two identical aluminum cleaning tanks should be prepared, one for the fluorocarbon sprayed aluminum veneer After the oil is removed, the other is to white clean the fluorocarbon sprayed aluminum veneer, which can solve the problem of serious pollution of the single tank.

(2) When spraying aluminum veneer with clean fluorocarbon, mix the bath liquid according to the bath liquid concentration, shake and pour out the liquid in the barrel.

(3) On the clean fluorocarbon sprayed aluminum plate protector, the number of workpieces should be gradually increased according to the number of workpieces. Due to the prolonged use time and the workpieces are bathing, the effective ingredients and liquid level will drop. If there is a lot of surface oil, the liquid tank If it is dirty, it can replenish OY-123 white aluminum degreaser. If it is dirty, all the baths should be replaced.